1996 Mercury Sable Keyless Entry Remote Fob Programming Instructions

1996 Mercury Sable Keyless Entry Remote Fob Programming Instructions

How to Program a 1996 Mercury Sable Keyless Entry Remote Fob

Programming Instructions Step by Step:

1.Turn ignition from OFF to RUN5 times within 10 seconds, with the 5thtimeending inRUN. Door locks will cycle to confirm programming mode.

2. Within 20 seconds press any button on first keyless remote. Door locks will cycle to confirm programming.

3. Within 20 seconds, press any button on second keyless remote. Door locks will cycle again to confirm programming.

4. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.

Can I Program an Ignition Key?

Use our Locksmith Search if you need professional help.
Back to blog