1997 Mercury Villager Keyless Entry Remote Fob Programming Instructions
Share
1997 Mercury Villager Keyless Entry Remote Fob Programming Instructions
How to Program a 1997 Mercury Villager Keyless Entry Remote Fob
Programming Instructions Step by Step:1.Enter vehicle, close and lock all doors using power lock switch on drivers door.
2. Insert and remove (do not turn) key from ignition at least 6 times within 10 seconds. Tail lamps will flash toindicate original code has been erased.
3. Insert and turn key to ACC position.
4. Press LOCK on first keyless remote. Tail lamps will flash to confirm programming.
5. To add additional remotes, unlock then lock the doors using power lock switch on drivers door.
6. Press LOCK button onsecondkeyless remote. Tail lamps will flash to confirm programming.
7. Open drivers door, turn ignition to OFF.
Use our Locksmith Search if you need professional help.